Multi-Factor Authentication

Multi-factor authentication (MFA), sometimes called two-factor authentication (2FA), adds an additional layer of security to your application by verifying their identity through additional verification steps.

It is considered a best practice to use MFA for your applications.

Users with weak passwords or compromised social login accounts are prone to malicious account takeovers. These can be prevented with MFA because they require the user to provide proof of both of these:

Something they know. Password, or access to a social-login account.
Something they have. Access to an authenticator app (a.k.a. TOTP), mobile phone or recovery code.

Overview#

Supabase Auth implements only Time-based One Time Password(TOTP) multi-factor authentication. This type of multi-factor authentication uses a timed one-time password generated from an authenticator app in the control of users.

Applications using MFA require two important flows:

Enrollment flow. This lets users set up and control MFA in your app.
Authentication flow. This lets users sign in using any factors after the conventional login step.

Supabase Auth provides:

Enrollment API - build rich user interfaces for adding and removing factors.
Challenge and Verify APIs - securely verify that the user has access to a factor.
List Factors API - build rich user interfaces for signing in with additional factors.

Below is a flow chart illustrating how these APIs work together to enable MFA features in your app.

graph TD; InitS((Setup flow)) --> SAAL1[/Session is AAL1/] --> Enroll[Enroll API] --> ShowQR[Show QR code] --> Scan([User: Scan QR code in authenticator]) --> Enter([User: Enter code]) --> Verify[Challenge + Verify API] --> Check{{Is code correct?}} Check -->|Yes| AAL2[/Upgrade to AAL2/] --> Done((Done)) Check -->|No| Enter InitA((Login flow)) --> SignIn([User: Sign-in]) --> AAL1[/Upgrade to AAL1/] --> ListFactors[List Factors API] ListFactors -->|1 or more factors| OpenAuth([User: Open authenticator]) --> Enter ListFactors -->|0 factors| Setup[[Setup flow]]

These sets of APIs let you control the MFA experience that works for you. You can create flows where MFA is optional, mandatory for all, or only specific groups of users.

Once users have enrolled or signed-in with a factor, Supabase Auth adds additional metadata to the user's access token (JWT) that your application can use to allow or deny access.

This information is represented by an Authenticator Assurance Level, a standard measure about the assurance of the user's identity Supabase Auth has for that particular session. There are two levels recognized today:

Assurance Level 1: aal1 Means that the user's identity was verified using a conventional login method such as email+password, magic link, one-time password, phone auth or social login.
Assurance Level 2: aal2 Means that the user's identity was additionally verified using at least one second factor, such as a TOTP code.

This assurance level is encoded in the aal claim in the JWT associated with the user. By decoding this value you can create custom authorization rules in your frontend, backend, and database that will enforce the MFA policy that works for your application. JWTs without an aal claim are at the aal1 level.

Adding to your app#

Adding MFA to your app involves these four steps:

Add enrollment flow. You need to provide a UI within your app that your users will be able to set-up MFA in. You can add this right after sign-up, or as part of a separate flow in the settings portion of your app.
Add unenrollment flow. You need to support a UI through which users can see existing devices and unenroll devices which are no longer relevant.
Add challenge step to login. If a user has set-up MFA, your app's login flow needs to present a challenge screen to the user asking them to prove they have access to the additional factor.
Enforce rules for MFA logins. Once your users have a way to enroll and log in with MFA, you need to enforce authorization rules across your app: on the frontend, backend, API servers or Row-Level Security policies.

Add enrollment flow#

An enrollment flow provides a UI for users to set up additional authentication factors. Most applications add the enrollment flow in two places within their app:

Right after login or sign up. This lets users quickly set up MFA immediately after they log in or create an account. We recommend encouraging all users to set up MFA if that makes sense for your application. Many applications offer this as an opt-in step in an effort to reduce onboarding friction.
From within a settings page. Allows users to set up, disable or modify their MFA settings.

We recommend building one generic flow that you can reuse in both cases with minor modifications.

Enrolling a factor for use with MFA takes three steps:

Call supabase.auth.mfa.enroll(). This method returns a QR code and a secret. Display the QR code to the user and ask them to scan it with their authenticator application. If they are unable to scan the QR code, show the secret in plain text which they can type or paste into their authenticator app.
Calling the supabase.auth.mfa.challenge() API. This prepares Supabase Auth to accept a verification code from the user and returns a challenge ID.
Calling the supabase.auth.mfa.verify() API. This verifies that the user has indeed added the secret from step (1) into their app and is working correctly. If the verification succeeds, the factor immediately becomes active for the user account. If not, you should repeat steps 2 and 3.

Example: React

Below is an example that creates a new EnrollMFA component that illustrates the important pieces of the MFA enrollment flow.

When the component appears on screen, the supabase.auth.mfa.enroll() API is called once to start the process of enrolling a new factor for the current user.
This API returns a QR code in the SVG format, which is shown on screen using a normal <img> tag by encoding the SVG as a data URL.
Once the user has scanned the QR code with their authenticator app, they should enter the verification code within the verifyCode input field and click on Enable.
A challenge is created using the supabase.auth.mfa.challenge() API and the code from the user is submitted for verification using the supabase.auth.mfa.verify() challenge.
onEnabled is a callback that notifies the other components that enrollment has completed.
onCancelled is a callback that notifies the other components that the user has clicked the Cancel button.

/**
 * EnrollMFA shows a simple enrollment dialog. When shown on screen it calls
 * the `enroll` API. Each time a user clicks the Enable button it calls the
 * `challenge` and `verify` APIs to check if the code provided by the user is
 * valid.
 * When enrollment is successful, it calls `onEnrolled`. When the user clicks
 * Cancel the `onCancelled` callback is called.
 */
export function EnrollMFA({
  onEnrolled,
  onCancelled,
}: {
  onEnrolled: () => void
  onCancelled: () => void
}) {
  const [factorId, setFactorId] = useState('')
  const [qr, setQR] = useState('') // holds the QR code image SVG
  const [verifyCode, setVerifyCode] = useState('') // contains the code entered by the user
  const [error, setError] = useState('') // holds an error message
  const onEnableClicked = () => {
    setError('')
    ;(async () => {
      const challenge = await supabase.auth.mfa.challenge({ factorId })
      if (challenge.error) {
        setError(challenge.error.message)
        throw challenge.error
      }
      const challengeId = challenge.data.id
      const verify = await supabase.auth.mfa.verify({
        factorId,
        challengeId,
        code: verifyCode,
      })
      if (verify.error) {
        setError(verify.error.message)
        throw verify.error
      }
      onEnrolled()
    })()
  }
  useEffect(() => {
    ;(async () => {
      const { data, error } = await supabase.auth.mfa.enroll({
        factorType: 'totp',
      })
      if (error) {
        throw error
      }
      setFactorId(data.id)
      // Supabase Auth returns an SVG QR code which you can convert into a data
      // URL that you can place in an <img> tag.
      setQR(data.totp.qr_code)
    })()
  }, [])
  return (
    <>
      {error && <div className="error">{error}</div>}
      <img src={qr} />
      <input
        type="text"
        value={verifyCode}
        onChange={(e) => setVerifyCode(e.target.value.trim())}
      />
      <input type="button" value="Enable" onClick={onEnableClicked} />
      <input type="button" value="Cancel" onClick={onCancelled} />
    </>
  )
}

Add unenrollment flow#

An unenrollment flow provides a UI for users to manage and unenroll factors linked to their accounts. Most applications do so via a factor management page where users can view and unlink selected factors.

When a user unenrolls a factor, call supabase.auth.mfa.unenroll() with the ID of the factor. For example, call supabase.auth.mfa.unenroll({factorId: "d30fd651-184e-4748-a928-0a4b9be1d429"}) to unenroll a factor with ID d30fd651-184e-4748-a928-0a4b9be1d429.

Example: React

Below is an example that creates a new UnenrollMFA component that illustrates the important pieces of the MFA enrollment flow. Note that users can only unenroll a factor after completing the enrollment flow and obtaining an aal2 JWT claim. Here are some points of note:

When the component appears on screen, the supabase.auth.mfa.listFactors() endpoint fetches all existing factors together with their details.
The existing factors for a user are displayed in a table.
Once the user has selected a factor to unenroll, they can type in the factorId and click Unenroll which creates a confirmation modal.

note

Unenrolling a factor will downgrade the assurance level from aal2 to aal1 only after the refresh interval has lapsed. For an immediate downgrade from aal2 to aal1 after enrolling one will need to manually call refreshSession()

/**
 * UnenrollMFA shows a simple table with the list of factors together with a button to unenroll.
 * When a user types in the factorId of the factor that they wish to unenroll and clicks unenroll
 * the corresponding factor will be unenrolled.
 */
export function UnenrollMFA() {
  const [factorId, setFactorId] = useState('')
  const [factors, setFactors] = useState([])
  const [error, setError] = useState('') // holds an error message
  useEffect(() => {
    ;(async () => {
      const { data, error } = await supabase.auth.mfa.listFactors()
      if (error) {
        throw error
      }
      setFactors(data.totp)
    })()
  }, [])
  return (
    <>
      {error && <div className="error">{error}</div>}
      <tbody>
       <tr>
         <td>Factor ID</td>
         <td>Friendly Name</td>
         <td>Factor Status</td>
       </tr>
       {factors.map(factor => (
        <tr>
          <td>{factor.id}</td>
          <td>{factor.friendly_name}</td>
          <td>{factor.factor_type}</td>
          <td>{factor.status}</td>
        </tr>
      ))}
      </tbody>
      <input
        type="text"
        value={verifyCode}
        onChange={(e) => setFactorId(e.target.value.trim())}
      />
      <button onClick={()=> supabase.auth.mfa.unenroll({factorId})}>Unenroll</button>
    </>
  )
}

Once a user has logged in via their first factor (email+password, magic link, one time password, social login etc.) you need to perform a check if any additional factors need to be verified.

This can be done by using the supabase.auth.mfa.getAuthenticatorAssuranceLevel() API. When the user signs in and is redirected back to your app, you should call this method to extract the user's current and next authenticator assurance level (AAL).

Therefore if you receive a currentLevel which is aal1 but a nextLevel of aal2, the user should be given the option to go through MFA.

Below is a table that explains the combined meaning.

Current Level	Next Level	Meaning
`aal1`	`aal1`	User does not have MFA enrolled.
`aal1`	`aal2`	User has an MFA factor enrolled but has not verified it.
`aal2`	`aal2`	User has verified their MFA factor.
`aal2`	`aal1`	User has disabled their MFA factor. (Stale JWT.)

Example: React

Adding the challenge step to login depends heavily on the architecture of your app. However, a fairly common way to structure React apps is to have a large component (often named App) which contains most of the authenticated application logic.

This example will wrap this component with logic that will show an MFA challenge screen if necessary, before showing the full application. This is illustrated in the AppWithMFA example below.

function AppWithMFA() {
  const [readyToShow, setReadyToShow] = useState(false)
  const [showMFAScreen, setShowMFAScreen] = useState(false)
  useEffect(() => {
    ;(async () => {
      try {
        const { data, error } = await supabase.auth.mfa.getAuthenticatorAssuranceLevel()
        if (error) {
          throw error
        }
        console.log(data)
        if (data.nextLevel === 'aal2' && data.nextLevel !== data.currentLevel) {
          setShowMFAScreen(true)
        }
      } finally {
        setReadyToShow(true)
      }
    })()
  }, [])
  if (readyToShow) {
    if (showMFAScreen) {
      return <AuthMFA />
    }
    return <App />
  }
  return <></>
}

supabase.auth.mfa.getAuthenticatorAssuranceLevel() does return a promise. Don't worry, this is a very fast method (microseconds) as it rarely uses the network.
readyToShow only makes sure the AAL check completes before showing any application UI to the user.
If the current level can be upgraded to the next one, the MFA screen is shown.
Once the challenge is successful, the App component is finally rendered on screen.

Below is the component that implements the challenge and verify logic.

function AuthMFA() {
  const [verifyCode, setVerifyCode] = useState('')
  const [error, setError] = useState('')
  const onSubmitClicked = () => {
    setError('')
    ;(async () => {
      const factors = await supabase.auth.mfa.listFactors()
      if (factors.error) {
        throw factors.error
      }
      const totpFactor = factors.data.totp[0]
      if (!totpFactor) {
        throw new Error('No TOTP factors found!')
      }
      const factorId = totpFactor.id
      const challenge = await supabase.auth.mfa.challenge({ factorId })
      if (challenge.error) {
        setError(challenge.error.message)
        throw challenge.error
      }
      const challengeId = challenge.data.id
      const verify = await supabase.auth.mfa.verify({
        factorId,
        challengeId,
        code: verifyCode,
      })
      if (verify.error) {
        setError(verify.error.message)
        throw verify.error
      }
    })()
  }
  return (
    <>
      <div>Please enter the code from your authenticator app.</div>
      {error && <div className="error">{error}</div>}
      <input
        type="text"
        value={verifyCode}
        onChange={(e) => setVerifyCode(e.target.value.trim())}
      />
      <input type="button" value="Submit" onClick={onSubmitClicked} />
    </>
  )
}

You can extract the available MFA factors for the user by calling supabase.auth.mfa.listFactors(). Don't worry this method is also very quick and rarely uses the network.
If listFactors() returns more than one factor (or of a different type) you should present the user with a choice. For simplicity this is not shown in the example.
Each time the user presses the "Submit" button a new challenge is created for the chosen factor (in this case the first one) and it is immediately verified. Any errors are displayed to the user.
On successful verification, the client library will refresh the session in the background automatically and finally call the onSuccess callback, which will show the authenticated App component on screen.

Enforce rules for MFA logins#

Adding MFA to your app's UI does not in-and-of-itself offer a higher level of security to your users. You also need to enforce the MFA rules in your application's database, APIs, and server-side rendering.

Depending on your application's needs, there are three ways you can choose to enforce MFA.

Enforce for all users (new and existing). Any user account will have to enroll MFA to continue using your app. The application will not allow access without going through MFA first.
Enforce for new users only. Only new users will be forced to enroll MFA, while old users will be encouraged to do so. The application will not allow access for new users without going through MFA first.
Enforce only for users that have opted-in. Users that want MFA can enroll in it and the application will not allow access without going through MFA first.

Database

Your app should sufficiently deny or allow access to tables or rows based on the user's current and possible authenticator levels.

caution

PostgreSQL has two types of policies: permissive and restrictive. This guide uses restrictive policies. Make sure you don't omit the as restrictive clause.

Enforce for all users (new and existing)

If your app falls under this case, this is a template Row Level Security policy you can apply to all your tables:

create policy "Policy name."
  on table_name
  as restrictive
  to authenticated
  using (auth.jwt()->>'aal' = 'aal2');

Here the policy will not accept any JWTs with an aal claim other than aal2, which is the highest authenticator assurance level.
Using as restrictive ensures this policy will restrict all commands on the table regardless of other policies!

Enforce for new users only

If your app falls under this case, the rules get more complex. User accounts created past a certain timestamp must have a aal2 level to access the database.

create policy "Policy name."
  on table_name
  as restrictive -- very important!
  to authenticated
  using
    (array[auth.jwt()->>'aal'] <@ (
       select
         case
           when created_at >= '2022-12-12T00:00:00Z' then array['aal2']
           else array['aal1', 'aal2']
         end as aal
       from auth.users
       where auth.uid() = id));

The policy will accept both aal1 and aal2 for users with a created_at timestamp prior to 12th December 2022 at 00:00 UTC, but will only accept aal2 for all other timestamps.
The <@ operator is PostgreSQL's "contained in" operator.
Using as restrictive ensures this policy will restrict all commands on the table regardless of other policies!

Enforce only for users that have opted-in

Users that have enrolled MFA on their account are expecting that your application only works for them if they've gone through MFA.

create policy "Policy name."
  on table_name
  as restrictive -- very important!
  to authenticated
  using (
    array[auth.jwt()->>'aal'] <@ (
      select
          case
            when count(id) > 0 then array['aal2']
            else array['aal1', 'aal2']
          end as aal
        from auth.mfa_factors
        where auth.uid() = user_id and status = 'verified'
    ));

The policy will only accept only aal2 when the user has at least one MFA factor verified.
Otherwise, it will accept both aal1 and aal2.
The <@ operator is PostgreSQL's "contained in" operator.
Using as restrictive ensures this policy will restrict all commands on the table regardless of other policies!

Server-Side Rendering#

tip

When using the Supabase JavaScript library in a server-side rendering context, make sure you always create a new object for each request! This will prevent you from accidentally rendering and serving content belonging to different users.

It is possible to enforce MFA on the Server-Side Rendering level. However, this can be tricky do to well.

You can use the supabase.auth.mfa.getAuthenticatorAssuranceLevel() and supabase.auth.mfa.listFactors() APIs to identify the AAL level of the session and any factors that are enabled for a user, similar to how you would use these on the browser.

However, encountering a different AAL level on the server may not actually be a security problem. Consider these likely scenarios:

User signed-in with a conventional method but closed their tab on the MFA flow.
User forgot a tab open for a very long time. (This happens more often than you might imagine.)
User has lost their authenticator device and is confused about the next steps.

We thus recommend you redirect users to a page where they can authenticate using their additional factor, instead of rendering a HTTP 401 Unauthorized or HTTP 403 Forbidden content.

APIs#

If your application uses the Supabase Database, Storage or Edge Functions, just using Row Level Security policies will give you sufficient protection. In the event that you have other APIs that you wish to protect, follow these general guidelines:

Use a good JWT verification and parsing library for your language. This will let you securely parse JWTs and extract their claims.
Retrieve the aal claim from the JWT and compare its value according to your needs. If you've encountered an AAL level that can be increased, ask the user to continue the login process instead of logging them out.
Use the https://<project-ref>.supabase.co/rest/v1/auth/factors REST endpoint to identify if the user has enrolled any MFA factors. Only verified factors should be acted upon.

Frequently asked questions#

Why is there a challenge and verify API when challenge does not do much?#

TOTP is not going to be the only MFA factor Supabase Auth is going to support in the future. By separating out the challenge and verify steps, we're making the library forward compatible with new factors we may add in the future -- such as SMS or WebAuthn. For example, for SMS the challenge endpoint would actually send out the SMS with the authentication code.

What's inside the QR code?#

The TOTP QR code encodes a URI with the otpauth scheme. It was initially introduced by Google Authenticator but is now universally accepted by all authenticator apps.

How do I check when a user went through MFA?#

Access tokens issued by Supabase Auth contain an amr (Authentication Methods Reference) claim. It is an array of objects that indicate what authentication methods the user has used so far.

For example, the following structure describes a user that first signed in with a password-based method, and then went through TOTP MFA 2 minutes and 12 seconds later. The entries are ordered most recent method first!

{
  "amr": [
    {
      "method": "totp",
      "timestamp": 1666086056
    },
    {
      "method": "password",
      "timestamp": 1666085924
    }
  ]
}

Use the supabase.auth.getAuthenticatorAssuranceLevel() method to get easy access to this information in your browser app.

You can use this PostgreSQL snippet in RLS policies, too:

jsonb_path_query(auth.jwt(), '$.amr[0]')

jsonb_path_query(json, path) is a function that allows access to elements in a JSON object according to a SQL/JSON path.
$.amr[0] is a SQL/JSON path expression that fetches the most recent authentication method in the JWT.

Once you have extracted the most recent entry in the array, you can compare the method and timestamp to enforce stricter rules. For instance, you can mandate that access will be only be granted on a table to users who have recently signed in with a password.

Currently recognized authentication methods are:

oauth - any OAuth based sign in (social login).
password - any password based sign in.
otp - any one-time password based sign in (email code, SMS code, magic link).
totp - a TOTP additional factor.
sso/saml - any Single Sign On (SAML) method.

The following additional claims are available when using PKCE flow:

invite - any sign in via an invitation.
magiclink - any sign in via magic link. Excludes logins resulting from invocation of signUp.
email/signup - any login resulting from an email signup.
email_change - any login resulting from a change in email.

More authentication methods will be added over time as we increase the number of authentication methods supported by Supabase.

Edit this page on GitHub

Multi-Factor Authentication

Overview#

Adding to your app#

Add enrollment flow#

Example: React

Add unenrollment flow#

Example: React

Add challenge step to login#

Example: React

Enforce rules for MFA logins#

Database

Enforce for all users (new and existing)

Enforce for new users only

Enforce only for users that have opted-in

Server-Side Rendering#

APIs#

Frequently asked questions#

Why is there a challenge and verify API when challenge does not do much?#

What's inside the QR code?#

How do I check when a user went through MFA?#